REYHEE CRUISER - Tiller Adjustment

Adjusting the tiller
The desired position should be determined by the user, such that the
handlebar, console, and dual throttle control levers are easily accessible
to the seated user.
The desired position should NOT create any obstruction or difculty for
the user to get in and out of the Cruiser.
With a rm and secure grip on the tiller, adjust it until the tiller is in the
desired position.
a)
b)
1)
Once the tiller is in the desired position, turn the tiller adjustment knob
clockwise until it is FULLY TIGHTENED.
When adjusting the tiller and determining the desired position, ALWAYS
ensure the tiller adjustment knob is FULLY TIGHTENED BEFORE the
user gets into the Cruiser to check if the current tiller position is desired
Otherwise, there may be risk of injury and product damage.
2)
It may take several adjustments until the desired position is found.c)
If this step is not completed prior to operating the Cruiser, you risk
potential injury from unsafe assembly.
Assembly (Cont.)
13