REYHEE CRUISER - Securing Main Body to Rear Section

Step three: Securing the main body to the rear section
Keep all body parts and any dangling items AWAY from any assembly
connection points, to prevent potential injury.
DO NOT lift any part of the Cruiser by its plastic parts, to prevent
potential injury or product damage.
The main body of the Cruiser (which has the deck and tiller)
The rear section of the Cruiser (which has the motor and lower seat post)
Locate:
Ensure steady footing.
a)
b)
1)
2)
Use one hand to grip the rear section by the lower seat post.3)
Simultaneously use the other hand to grasp the handle on the main body, brace your
thumb on top of the connection point cover, and gradually pull upwards.
4)
Align the main body with the rear section.5)
Gradually lower both the main body and the rear section until they are afxed.6)
Ensure the connection prongs at the base of the lower seat post are safely inside the
connection point cover.
7)
Release the handle on the main body and fold it down in the direction of the lower
seat post.
8)
Press down on the main body to ensure it is securely afxed to the rear section.9)
Assembly (Cont.)
14