Chapter 1 – Installation
9450 Duolink Exit Alarm Receiver Hardware Installation Guide Page 19 of 30
0510-1103-G
To mount DuoLinks for double doors in a facility with infant and
patient transmitters:
1. Mount the top of the first DuoLink approximately 48'' (according to the
location determination assessment) from the floor in a horizontal
direction on the left side of the doorway
2. Mount the second antenna approximately 46” (according to the
location determination assessment) from the floor in a vertical
direction on the left side of the doorway
3. Mount the top of the third receiver approximately 39” (according to the
location determination assessment) from the floor in a horizontal
direction on the right side of the doorway
4. Mount the fourth antenna approximately 3’ (according to the location
determination assessment) from the floor in a vertical direction on the
right side of the doorway
5. Mount the metal mounting bracket first and then mount the plastic
assembly to the metal bracket with the supplied hardware
To Next Page
Loading...