Need help?Do you have a question about the RFT 9450 and is the answer not in the manual?
Critical safety instructions for equipment operation, installation, and use.
Important advice regarding product handling, disposal, and resident safety.
Lists materials in devices that may cause sensitivities or allergies.
Specifies UL 294 Access Control Performance Levels for the device.
Introduces the guide's scope, the 9450 system, and its function.
Identifies the target readers for this installation guide.
Provides contact details for RF Technologies products and support.
Lists phone numbers and email for technical assistance.
Gives contact information for part replacement and orders.
Directs users to their Sales Manager for system add-ons.
States where to find product warranty information.
Explains DuoLink function, interface, and placement considerations.
Shows and names the LED and Gain Control on the DuoLink.
Details how to configure the DuoLink's operating frequency.
Describes the receive area and common sources of interference.
Provides steps to assess the environment for optimal mounting.
Offers guidance on mounting DuoLinks for single and double doors.
Explains how to wire the DuoLink to the exit controller.
Explains the need to test DuoLink location for interference and coverage.
Discusses testing and tuning the DuoLink for proper operation.
Provides detailed steps for tuning gain and verifying coverage.
Explains the use of raceway to conceal wires after mounting.
Details how to use the Antenna Splice Adapter for wire management.
Lists technical specifications for the DuoLink receiver unit.
Provides specifications and part numbers for raceway components.
General| IF | 455 kHz |
|---|---|
| Impedance | 50 ohms |
| Frequency Range | 0.1-30 MHz |
| Modes | AM, FM, SSB, CW |
| Image Rejection | 60 dB |
To Next Page