RMS 8424S User Manual
Before opening RMS 8424S processor shipping box, inspect it for damage. If you find any damage, notify
the shipping carrier immediately for all claims adjustments. As you open the box, compare its contents
against the packing slip. If you find any shortages, contact your sales representative.
Once you have removed all the components from their packaging and checked that all the listed
components are present, visually inspect the system to ensure there was no damage during shipping. If
there is damage, notify the shipping carrier immediately for all claims adjustments.
Site Preparation
The environment in which you install your RMS 8424S should be clean, properly lit, free from static, and
have adequate power, ventilation, and space for all components.
To Next Page
Loading...
Need help?
General