Initial Scanner Setup
108
9
B Set [VStart Position] (X2 and Y2)
to 0 inch, and then press the {#}
key.
Set X2 and Y2 to 0 inch.
C Specify [VScan Area] (X3 and
Y3) using the number keys,
and then press the {#} key.
For example, set X3 to 17 inch
and Y3 to 8 inch.
Scanning part of an original
The following diagrams explain
the relationship between the
[VOriginal Size] (X1 and Y1), [VStart
Position] (X2 and Y2), and [VScan
Area] (X3 and Y3) settings.
A Specify [V Original Size] (X1 and
Y1) using the number keys,
and then press the {#} key.
For example, set X1 to 17 inch
and Y1 to 8 inch.
AHU008S
To Next Page
Loading...
