Ricoh 3030 - 5 Delivering Scan Files

61
5. Delivering Scan Files
Scan files can be sent to a specified destination using the network delivery scan-
ner function. This chapter explains the preparation for delivering files, various
display screens, delivery procedures, and how to check the delivery results
when this function is used.
Important
❒ A delivery server in which the ScanRouter delivery software is installed is
necessary to use the network delivery scanner function. Information about
delivery destinations and senders must be registered first in the delivery serv-
er. Also, connected devices should be configured in [Set I/O Device] of the Scan-
Router delivery software. For details, see the ScanRouter delivery software
Help.