Ricoh 3030 - Scanning Originals in Several Times; When a Time Limit Is Specified for Additional Originals

Configuring/Registering Scan Settings
82
7
Scanning Originals in Several Times
Originals can be divided and scanned
to form a single file using either the
exposure glass or the ADF.
When originals are divided and
scanned, the machine can wait two
different ways for additional origi-
nals.
• Wait a specified length of time for
the next original (Time limit set)
• Wait indefinitely for the next orig-
inal (No time limit set)
When a Time Limit Is Specified
for Additional Originals
In advance, specify the waiting time
in seconds for placing the additional
originals.
• Scanning using the exposure glass
Select [Set Wait Time] for [Wait Time
for Next Orig.: Exposure Glass] of
[Scanner Features].
• Scanning using the ADF
Select [Set Wait Time] for [Wait Time
for Next Original(s): SADF] in [Scanner
Features].
Reference
p.105 “Wait Time for Next Orig.:
Exposure Glass” or “Wait Time for
Next Original(s): SADF”
A Place the originals.
Reference
The procedure for placing the
originals is the same as that for
placing the originals for copy-
ing. For details about placing
the originals, see “Placing Orig-
inals”, Copy Reference.
Note
❒ Originals are scanned in order.
Place them from the first page.
B Make settings for scanning area
and original orientation.
Reference
p.79 “Making the Settings Relat-
ed to the Orientation of the
Original and Scanned Sides”
C Make settings for sending by e-
mail, Scan to Folder, storing, or
delivering.
Reference
p.17 “Procedure for Sending E-
mail”
p.33 “Procedure for Sending by
Scan to Folder”
p.48 “Storage Procedure”
p.64 “Delivery Procedure”