Configuring/Registering Scan Settings
84
7
When a Time Limit Is Not
Specified for Additional
Originals
A Place the originals.
Reference
The procedure for placing the
originals is the same as that for
placing the originals for copy-
ing. For details about placing
the originals, see “Placing Orig-
inals”, Copy Reference.
Note
❒ Originals are scanned in order.
Place them from the first page.
B Make settings such as original
orientation and scanning area.
Reference
p.79 “Making the Settings Relat-
ed to the Orientation of the
Original and Scanned Sides”
C Select [Batch] for [Original Feed
Type].
Note
❒ If [Batch] does not appear, select
[Batch] in [Switch to Batch] of
[Scanner Features]. See p.106
“Switch to Batch”.
D Make settings for sending by e-
mail, or Scan to Folder, storing, or
delivering.
Reference
p.17 “Procedure for Sending E-
mail”
p.33 “Procedure for Sending by
Scan to Folder”
p.48 “Storage Procedure”
p.64 “Delivery Procedure”
E Press the {Start} key.
Note
❒
The selected destination appears
while scanning the originals.
F When there are additional origi-
nals to scan, place them and press
the {Start} key.
Repeat this step until all originals
are scanned.
G After all originals are scanned,
press the {#} key.
Storing or sending starts.
To Next Page
Loading...
