Ricoh 3030 - 7 Configuring;Registering Scan Settings; Specifying Scan Settings

77
7. Configuring/Registering
Scan Settings
This section describes how to specify scan settings and how to configure settings
according to the orientation of the original. In addition, this section describes the
programming function by which you can register frequently used settings.
Specifying Scan Settings
A Press [Scan Settings].
B Select items such as resolution
and original size, and then
change their settings.
Specify the basic scan settings
(scan type, resolution, image den-
sity, scan size, and edit) as follows:
❖ Scan Type
Originals are scanned according
to the selected scan type.
Select the scan type from the fol-
lowing:
•Text (Print)
For standard originals con-
taining mainly text.
Printer printing is best
scanned with Text (Print).
•Text (OCR)
For standard originals con-
taining mainly text.
This setting increases charac-
ter recognition accuracy. It is
suitable for use when scan-
ning and then using an opti-
cal character recognition
(OCR) application.
•Text / Photo
For originals containing a
mixture of text and photo-
graphs
•Photo
For originals containing pho-
tographs and other pictures
(two-value).
Creates scanned images suit-
able for printing.
•Gray Scale
For originals containing pho-
tographs and other pictures
(multi-value).
Creates scanned images suit-
able for displaying on a com-
puter screen.
❖ Resolution
Select the resolution from 100
dpi, 200 dpi, 300 dpi, 400 dpi, or
600 dpi.
❖ Image Density
Select the image density in sev-
en steps from iLighter (1) to
Darkerj (7) , or use Auto Im-
age Density.