Ricoh 3030 - Page 58

Storing Files
50
4
B Specify file information.
Specifying a user name
A Press [User Name].
B Select the user name.
Note
❒ The user names shown here
are names that were regis-
tered on the [Administrator
Tools] tab in [System Settings].
To specify a name not shown
here, press [Non-programmed
Name], and then enter the
user name.
C Press [OK].
Specifying a file name
Scan files are automatically named
SCAN0001, SCAN0002, etc. If nec-
essary, you can change the file
name.
A Press [File Name].
The soft keyboard appears.
B Enter the file name.
Reference
For information about how
to enter characters, see Gener-
al Settings Guide.
C Press [OK].
Specifying a password
When a password is specified,
only a person who knows the pass-
word can view the file.
A Press [Password].
B Enter a four to eight digit
number using the number keys.
C Press the {#} key.
Note
❒ To change the password, press
[Change], and then enter a
new one.
D Enter the same number as you
entered in step B for confirma-
tion.
E Press the {#} key.
F Press [OK].
Important
❒ Do not forget the password.
If you forget it, consult the
system administrator of the
machine.
C Press [OK] to return to the previ-
ous screen.