Ricoh 3030 - Page 73

Delivering Scan Files
65
5
G Specify the destination.
You can specify the destination in
the following ways:
•
Select it from the destination list.
• Specify its registration number.
• Search for it.
•
Enter the e-mail address directly.
Note
❒ The destination list is updated
automatically.
❒ Depending on the security set-
tings, certain destinations may
not be displayed.
Selecting a destination from the
list
A Select the destination.
The selected destination is high-
lighted and also is displayed in
the destination field at the top of
the screen.
Note
❒ If the target destination does
not appear, take one of the
following steps:
• Display the destination by
selecting its initial letter
from the title.
• Display the destination by
pressing [U] or [T].
❒ The destination titles are pro-
gramed in the delivery serv-
er.
❒
To deselect a destination, press
the destination once more, or
press [UPrev.] or [TNext] to
display the destination in the
destination field, and then
press the {Clear/Stop} key.
B To select more destinations, re-
peat step A.
Using a registration number to
select a destination
A Press [Registration No.].
B Enter the five digit registration
number that has been assigned
to a destination folder using
the number keys.
If the entered number is less
than five digits, press the {#}
key after the last number.
Example: To enter 00009
Press the {9} key, and then
press the {#} key.
Note
❒ To deselect a destination,
press [UPrev.] or [TNext] to
display the destination in the
destination field, and then
press the {Clear/Stop} key.
C To select more destinations, re-
peat step B.