EasyManua.ls Logo

Ricoh 700 - 3 Installing the Printer Driver and Software; Auto Run

Ricoh 700
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17
3. Installing the Printer Driver
and Software
All of the procedures in this manual assume that you are familiar with general
Windows procedures and practices. If you are not, see the documentation that
comes with Windows for more information.
Auto Run
You can install the printer driver by using Auto Run.
Auto Run is available for the following operating systems:
Windows 95/98
Windows 2000
Windows NT 4.0
If your system is a Macintosh, see information about installing the printer driver.
P.19 “Windows 95/98 - Installing the PCL 6/5e Printer Driver”.
P.31 “Macintosh”.
Important
Before starting this installation, close all documents and applications. In a net-
work environment, confirm that users who are logged on are disconnected.
Be sure to do this when it will create the least interference with other users.
After installing a printer driver, you must restart the computer.
Limitation
If your system is Windows 2000 or Windows NT 4.0, installing a printer driv-
er by Auto Run requires permission of Administrators. When you install a
printer driver by Auto Run, log on using an account that has Administrators
permission.
Reference
For more information about the software and utilities included on the CD-
ROM, see P.7 “Software and Utilities Included on the CD-ROM”.
Note
Auto Run might not automatically work with certain OS settings. In this case,
manually run "INSTTOOL.EXE" on the root to install printer driver.
If you want to cancel Auto Run, insert the CD-ROM while pressing the
{
SHIFT
} key until your computer finishes accessing the CD-ROM.

Related product manuals