Ricoh 700 - Installing the PCL 6;5 E Printer Driver; Windows 95;98 - Installing the PCL 6;5 E Printer Driver; Windows 2000 - Installing the PCL 6;5 E Printer Driver

Installing the PCL 6/5e Printer Driver
19
3
Installing the PCL 6/5e Printer Driver
Windows 95/98 - Installing the PCL 6/5e Printer Driver
Installing the printer driver
Install the driver in accordance with the steps explained. ⇒ P.18 “Installing by
Auto Run”
Setting up options
Note
❒
When setting up options, you should access the Printer Properties from Win-
dows. You cannot access the Printer Properties from an application.
A Click
[
Start
]
on the taskbar, point to
[
Settings
]
, and then click
[
Printers
]
.
The
[
Printers
]
window appears.
B Click the icon of the printer you want to use. On the
[
File
]
menu, click
[
Prop-
erties
]
.
C Click the
[
Accessories
]
tab.
D Select any options you have installed from the
[
Options
]
group.
E Click
[
OK
]
.
Windows 2000 - Installing the PCL 6/5e Printer Driver
Installing the printer driver : Parallel connection
If the printer is connected to the computer with parallel cable, you must install
the printer driver by using
[
Add Printer Wizard
]
. Follow the procedure below.
Note
❒
If the "plug and play" function starts, you can also install the printer driver
following the instructions on the screen.
❒
During installation by using
[
Add Printer Wizard
]
,
[
Digital Signature Not Found
]
di-
alog box might appears. In this case, click
[
Yes
]
to continue the installation.
A Close all applications that are currently running.
B Click
[
Start
]
on the taskbar, point to
[
Settings
]
, and then click
[
Printers
]
.
The
[
Printers
]
window appears.