Ricoh 700 - Macintosh; Macintosh - Installing the Postscript Printer Driver; Setting up the PPD File

Macintosh
31
3
Macintosh
Macintosh - Installing the PostScript Printer Driver
It is necessary to install a printer driver and a PPD file to print from a Macintosh.
Follow these steps to install a printer driver and a PPD file into a Macintosh us-
ing a system 8.5 or later operating system.
A Insert the CD-ROM into the CD-ROM drive.
B Double-click the CD-ROM icon.
C Double-click the
[
PS
]
folder.
D Double-click the folder of the language you use.
E Open
[
DISK1
]
and double-click the installer icon.
F Follow the instructions on the screen.
G Double-click
[
Extensions
]
.
H Double-click
[
Printer Descriptions
]
.
I Double-click the CD-ROM icon on the desktop.
J Double-click
[
DISK1
]
in the folder of the language you use.
K Click and drag the PPD file into
[
Printer Descriptions
]
.
L Click and drag the “Job Log” file into
[
Printer Descriptions
]
in
[
Extensions
]
in
[
System Folder
]
.
M Restart the Macintosh.
Setting Up the PPD File
Preparation
Confirm that the printer is connected to an AppleTalk network before per-
forming the following procedure.
A On the
[
Apple
]
menu, select
[
Chooser
]
.
B Click the
[
Adobe PS
]
icon.
C In the
[
Select a PostScript Printer:
]
list, click the name of the printer you want
to use.