Installing the Printer Driver and Software
20
3
C Double-click the
[
Add Printer
]
icon.
[
Add Printer Wizard
]
starts.
D Check
[
Local Printer
]
and click
[
Next
]
.
A dialog box for selecting the printer port appears.
E Click to select the printer port you want to use, and then click
[
Next
]
.
A dialog box for selecting the printer manufacture and model name appears.
F Click
[
Have Disk
]
.
A dialog box for installing the driver from a disk appears.
G Insert the CD-ROM into the CD-ROM drive while pressing the {
SHIFT
} key
until the computer finishes accessing the CD-ROM.
Note
❒
If the Auto Run program starts, click
[
Cancel
]
.
H Change the drive name in the list box to the name of the CD-ROM drive,
and then click
[
Browse
]
.
I In the box, double-click
[
PCL5E
]
or
[
PCL6
]
and
[
NT4
]
. Then double-click the
folder of the appropriate language for the operating system. Finally, click
[
Open
]
.
J Click
[
OK
]
.
A printer model selection dialog box appears.
K Click to select the name of the printer whose driver you want to install, and
then click
[
Next
]
.
A dialog box for changing the printer name appears.
L Change the name of the printer if you want, and then click
[
Next
]
.
M Click
[
Next
]
.
N In the next dialog box asking if you want to print a test page, select
[
No
]
and
then click
[
Next
]
.
A confirmation dialog box appears.
O Confirm the settings you have set, and then click
[
Next
]
.
The installer copies the printer driver files from the CD-ROM to the comput-
er's hard disk.
P You should set up the options with the printer driver.
To Next Page
Loading...