Ricoh 700 - Page 31

Installing the PCL 6/5e Printer Driver
21
3
Installing the printer driver : Network environment
You can install the PCL 6/5e printer driver by using Auto Run.
Limitation
❒
Installing a printer driver by Auto Run requires Administrators permission.
When you install a printer driver by Auto Run, log on using an account that
has Administrators permission.
Note
❒
Auto Run might not automatically work with certain OS settings. In this case,
manually run "INSTTOOL.EXE" on the root to install printer driver.
❒
If you want to cancel Auto Run, insert the CD-ROM while pressing the
{
SHIFT
} key until the computer finishes accessing the CD-ROM.
A Close all applications that are currently running.
B Insert the CD-ROM into the CD-ROM drive.
C Follow the instructions on the screen.
D Restart the computer after installation is complete.
E You should set up the options with the printer driver.
If you want to share the printer on Windows 2000, you must not install the print-
er driver using Auto Run. In this case, cancel Auto Run and install the printer
driver using
[
Add Printer Wizard
]
in the
[
Printers
]
window.
When prompted for the Windows 2000 alternate printer driver location, select
the following folder in the CD-ROM.
Use the printer driver for Windows NT 4.0.
Note
❒
During installation by using
[
Add Printer Wizard
]
, the
[
Digital Signature Not Found
]
dialog box might appears. In this case, click
[
Yes
]
to continue the installation.
• PCL 5e
\DRIVERS\PCL5E\NT4\(Language)\DISK1\
• PCL 6
\DRIVERS\PCL6\NT4\(Language)\DISK1\
When prompted for the Windows NT 4.0 alternate driver location, select the fol-
lowing folder in the CD-ROM.
• PCL 5e
\DRIVERS\PCL5E\NT4\(Language)\DISK1\
• PCL 6
\DRIVERS\PCL6\NT4\(Language)\DISK1\
When prompted for the Windows 95/98 alternate printer driver location, select
the following folder in the CD-ROM.