Ricoh 700 - Page 35

Installing the PostScript Printer Driver
25
3
J In the
[
Folders:
]
box, double-click
[
PS
]
and
[
WIN95_98
]
. Then double-click the
folder of the appropriate language for the operating system. Finally, click
[
OK
]
.
K Click
[
OK
]
.
L Click to select the name of the printer whose driver you want to install, and
then click
[
Next
]
.
M In the
[
Available ports:
]
box, click to select
[
Printer Port
]
, and then click
[
Next
]
.
N Change the name of the printer if you want, and then click
[
Next
]
.
O Select whether or not you want to print a test page, and then click
[
Finish
]
.
P If you are asked whether you want to restart Windows, select
[
Yes
]
. If you
are not asked, restart Windows after completing the installation.
Important
❒
If the printer is equipped with certain options (ex. the paper feed unit or
memory unit), you should set up the options with the printer driver.
Setting up options
Note
❒
When setting up options, you should access the
[
Device Options
]
tab from Win-
dows. You cannot set up options when accessing the
[
Device Options
]
tab from
an application.
A Click
[
Start
]
on the taskbar, point to
[
Settings
]
, and then click
[
Printers
]
.
The
[
Printers
]
window appears.
B Click the icon of the printer you want to use. On the
[
File
]
menu, click
[
Prop-
erties
]
.
C Click the
[
Device Options
]
tab.
The
[
Installable options
]
group appears.
D From the
[
Installable options
]
box, select the option you have installed.
The current setting is displayed in the
[
Change settings for:
]
list.
E Use the
[
Change setting for:
]
list to select the appropriate setting for the select-
ed option.
F Click
[
Apply
]
to apply the settings you made.
G After making all settings you want, click
[
OK
]
.