COPIER
B044/B045/B046 1-6 SM
8. Open the front door [A].
9. If installing a toner-bottle model
(B044 or B046):
• Lift lever [B], press in on latch [C]
and pull the bottle holder [D] out.
(It is not necessary to pull it
completely out of the machine,
however.)
• Take a new bottle of toner, shake
it several times, remove its outer
cap [E], and load as shown. Then
push the bottle holder back into
the machine, and press the latch
down to lock it.
If installing a toner-hopper magazine (THM)
model (B045):
• Shake the magazine several times, then
peel off the paper [F] from a new THM [G],
and load the THM into the machine.
B046I112.WMF
B046I301.WMF
B046I114.WMF
[C]
[B]
[D]
[A]
[G]
[F]
[E]
To Next Page
Loading...
