Specifying the Administrator/Security Functions
116
6
E Press [On] and then [OK].
A confirmation message appears.
F Press [Yes].
G Press the {User Tools/Counter} key.
Canceling Service Mode Lock
For a customer engineer to carry out inspection or repair in service mode, the
machine administrator must log onto the machine and cancel the service mode
lock.
Preparation
For details about logging on and logging off with administrator authentica-
tion, see p.106 “Logging on Using Administrator Authentication”, p.107
“Logging off Using Administrator Authentication”.
A Press the {User Tools/Counter} key.
B Press [System Settings].
C Press [Administrator Tools].
D Press [Service Mode Lock].
E Press [Off] and then press [OK].
F Press the {User Tools/Counter} key.
The customer engineer can switch to service mode.
To Next Page
Loading...
