Management Based on Authentication and Access Control
78
5
I Enter the Certificate Authority name (optional) in [CA Identifying Information],
and then click [Next].
J Leave [Data Storage Location] at its default, and then click [Next].
-Creating the Server Certificate
After installing Internet Information Services (IIS) and Certificate services Win-
dows components, create the Server Certificate as follows:
A Start [Internet Services Manager].
B Right-click [Default Web Site], and then click [Properties].
C On the [Directory Security] tab, click [Server Certificate].
Web Server Certificate Wizard starts.
D Click [Next].
E Select [Create a new certificate], and then click [Next].
F Select [Prepare the request now, but send it later], and then click [Next].
G Enter the required information according to the instructions given by Web
Server Certificate Wizard.
H Check the specified data, which appears as Request File Summary, and then
click [Next].
The server certificate is created.
-If the fax number cannot be obtained
If the fax number cannot be obtained during authentication, specify the setting
as follows:
A Start [C:\WINNT\SYSTEM32\adminpak].
Start Setup Wizard.
B Select [Install all of the Administrator Tools], and then click [Next].
C On the [Start] menu, select [Run].
D Enter [mmc], and then click [OK].
E On the [Console], select [Add/Remove Snap-in].
F Click [Add].
G Select [ActiveDirectory Schema], and then click [Add].
H Select [facsimile Telephone Number].
I Right-click, and then click [Properties].
J Select [Replicate this attribute], and then click [Apply].
To Next Page
Loading...
