Enhanced Security
5
1
Setting Up the Machine
If you want higher security, make the following setting before using the ma-
chine:
A Turn the machine on.
B Press the {User Tools/Counter} key.
C Press {System Settings}.
D Press {Interface Settings}.
E Specify IP Address.
F Connect the machine to the network.
G Start the Web Image Monitor, and then log on to the machine as the admin-
istrator.
H Install the server certificate.
I Enable secure sockets layer (SSL).
J Enter the administrator’s user name and password.
K During steps
F
to
I
, the administrator’s default account (user name: admin,
password: blank) in unencrypted form will be vulnerable to network inter-
ception, and this account may be used for breaking into the machine over
the network.
If you consider this risky, we recommend that you specify a temporary ad-
ministrator password between steps
A
and
F
.
To Next Page
Loading...
