Management Based on Authentication and Access Control
72
5
F Select the "Printer Job Auth." level.
Note
❒ If you select [Entire], you cannot print using a printer driver or a device that
does not support authentication. To print under an environment that does
not support authentication, select [Simple (All)]. By making this setting, only
registered users will be able to print.
❒ If you select [Simple(Limitation)], you can specify clients for which printer job
authentication is not required. Specify [Parallel Interface: Simple], [USB: Sim-
ple] and the clients’ IP address range in which printer job authentication is
not required. Specify this setting if you want to print using unauthenticat-
ed printer drivers or without any printer driver. Authentication is required
for printing with non-specified devices.
❒ If you select [Simple (All)] or [Simple(Limitation)], you can print even with un-
authenticated printer drivers or devices.Specify this setting if you want to
print with a printer driver or device that cannot be identified by the ma-
chine or if you do not require authentication for printing.However, note
that, because the machine does not require authentication in this case, it
may be used by unauthorized users.
Reference
For details, see p.86 “Printer Job Authentication Levels and Printer Job
Types”.
Specifying [Simple(Limitation)]
A Press [Simple(Limitation)]
B Press [Change].
To Next Page
Loading...
