Enabling Authentication
83
5
Specifying Integration Server Authentication
A Press the {User Tools/Counter} key.
B Press [System Settings].
C Press [Administrator Tools].
D Press [User Authentication Management].
E Select [Integration Svr. Auth.].
Note
❒ If you do not wish to use User Authentication Management, select [Off].
F Press [Change] for “Server Name”.
Specify the name of the server for external authentication.
G Enter the server name, and then press [OK].
Enter the IP address or host name.
H In ”Authentication Type”, select the authentication system for external au-
thentication.
Select an available authentication system.
I Press [Change] for “Domain Name”.
To Next Page
Loading...
