Enabling Authentication
85
5
❒ If you select [Simple(Limitation)], you can specify clients for which printer job
authentication is not required. Specify [Parallel Interface: Simple], [USB: Sim-
ple] and the clients’ IP address range in which printer job authentication is
not required. Specify this setting if you want to print using unauthenticat-
ed printer drivers or without any printer driver. Authentication is required
for printing with non-specified devices.
❒ If you select [Simple (All)] or [Simple(Limitation)], you can print even with un-
authenticated printer drivers or devices.Specify this setting if you want to
print with a printer driver or device that cannot be identified by the ma-
chine or if you do not require authentication for printing.However, note
that, because the machine does not require authentication in this case, it
may be used by unauthorized users.
Specifying [Simple(Limitation)]
A Press [Simple(Limitation)]
B Press [Change].
C Specify the range in which [Simple(Limitation)] is applied to Printer Job
Authentication.
D Press [OK].
To Next Page
Loading...
