Management Based on Authentication and Access Control
90
5
I Select [Use Auth. Info at Login] in “SMTP Authentication”.
If the setting to be specified does not appear, press [TNext] to scroll down to
other settings.
Limitation
❒ When using [Use Auth. Info at Login] for “SMTP Authentication”, “Folder
Authentication”, or “LDAP Authentication”, a user name other than “oth-
er” , “admin” , “supervisor” or “HIDE***” must be specified. The symbol
“***” represents any character.
❒ To use [Use Auth. Info at Login] for SMTP authentication, a login password
up to 64 characters in length must be specified.
Note
❒ For folder authentication, select [Use Auth. Info at Login] in “Folder Authen-
tication”.
❒ For LDAP authentication, select [Use Auth. Info at Login] in “LDAP Authen-
tication”.
J Press [OK].
K Press [Exit].
L Press the {User Tools/Counter} key.
To Next Page
Loading...
