Installing Options
44
3
K Fasten the controller board to the
printer using the three screws.
Note
❒ After finishing installation, you
can check the User Account En-
hance Unit is properly installed:
Print the configuration page
from the “List/Test Print”
menu. If it is installed properly,
you will see “Accounting Mod-
ule” for “Controller Option”.
❒ If the User Account Enhance
Unit is not installed properly,
reinstall it from step
A
. If you
cannot install it properly even
after attempting reinstallation,
contact your sales or service
representative.
Reference
For printing the configuration
page, see p.30 “Test Printing”.
Install the controller board care-
fully. For details, see p.36 “Cau-
tion when re-installing the
controller board”.
AET072S
GaiaP1GB_Setup-F4_FM_forPaper.book Page 44 Friday, June 3, 2005 7:50 AM
To Next Page
Loading...
Need help?
General