IS LIT OR BLINKING: ADDING TONER
When the
Add Toner
indicator blinks, it is time to supply toner (copying
is still possible). When the
Add Toner
indicator is continuously on,
copies cannot be made until the toner bottle is replaced.
WARNING: Do not incinerate the used toner bottle. Toner dust might ignite
when exposed to open flame.
WARNING: Dispose of the used toner bottle according to local regulations.
NOTE: When adding toner, do not turn off the main switch. If you do, your copy
settings are cleared.
NOTE: Before setting the new toner bottle, shake it well at least 5 or 6 times.
NOTE: Do not remove the inner cap of the new toner bottle.
1
Open the copier’s front cover.
2
You can find the sticker explain-
ing how to add toner inside the
front cover, as shown in the illus-
tration.
3
Load the new toner bottle follow-
ing the instructions on the sticker.
f-eu-6
IS LIT OR BLINKING: ADDING TONER
98
To Next Page
Loading...
