Ricoh Aficio FT4027 - Page 69

S
The position of the margin to be erased is determined according to the selected
copy paper and reproduction ratio. Make sure to select copy paper suitable for
your original.
S
The width of the margin to be erased can be changed with the user tools.

See
page 129.
S
Regarding functions that cannot be used together with this function,

see page
86.
1
Press the
Erase
key once to se-
lect the Erase Center, twice to
select the Erase Border, or three
times to select both of them.
2
Set your original on the exposure
glass or in the optional document
feeder.

See page 31, 32, or
34.
S
If you place a book original on the
exposure glass, the original must be
aligned to the rear left corner.
3
Press the
Start
key.
f-eu-5
1
2
mm
i10Key { j
ERASING PARTS OF THE COPY IMAGE (Erase)
67