ADDING MARGINS FOR BINDING (Margin
Adjustment)
Note: Before using Margin Adjustment, you have to change copier’s default set-
tings with the user tools. (
See page 127.) If you do this, the Erase key is
used as the Margin Adjustment key. In this case, you cannot use the Erase
function.
Note: After selecting Margin Adjustment, put the sticker (key name sheet) for
Margin Adjustment on the operation panel. The sticker is enclosed as an
accessory.
S
The width of the margin can be changed with the user tools.
See page 128.
S
Regarding functions that cannot be used together with this function,
see page
86.
Margin For One-sided Copying
1
Press the
Margin Adjustment
(Erase)
key once to set the left
margin or twice to set the right
margin.
2
Make your copies.
f-eu-5
1
1
1
1
1
2
1
2
mm
i10Key { j
ADDING MARGINS FOR BINDING (Margin Adjustment)
68
To Next Page
Loading...
