Copier’s condition Action
is blinking.
Original size or direction does not match the copy paper
size or direction.
¯
Select the proper paper size or direction.
When making copies in Auto Paper Select:
¯
There is no proper copy paper size or direction.
(copying is possible.) Select the proper paper size,
or press the
Start
key to continue copying.
¯
If you use translucent or transparent originals, or
originals with tags, the original size might not be
correctly detected. Do not use such originals.
When making copies in Auto Reduce/Enlarge:
¯
The copy paper direction does not match the
original direction. (Copying is possible.) Change the
original direction, select copy paper oriented proper
direction, or press the
Start
key to continue
copying.
¯
The original size might not be detected correctly.
Use originals of a standard size.
¯
If you use translucent or transparent originals, or
originals with tags, the original size might not be
detected correctly. Do not use such originals.
Max
indicator blinks.
Entered data is over the maximum or under the
minimum allowed. The data is automatically corrected
within range.
The indicator of the
Auto Image
Density
key blinks.
Turn the main switch off and on. If this condition re-
occurs, call your service representative and explain the
problem.
The
Manual Image Density
indicator blinks.
is blinking.
Previous copies remain in the unit for two-sided copying
when you try to make two-sided copies.
¯
Press the
Start
key to get the remaining copies out.
Misfeeds occur frequently.
Is the right kind of paper in the paper tray?
¯
Paper size and weight must be within the
specifications for this copier.
Is folded, wrinkled, damp, or curled paper in the paper
tray?
¯
Always use dry, undamaged paper.
f-eu-6
IF YOUR COPIER DOES NOT OPERATE AS YOU WANT
93
To Next Page
Loading...
