Ricoh Aficio MP 2000 User Manual

Specifying E-mail Destinations
23
1
Searching for a Destination in the LDAP Server
You can search the LDAP server for an address and then specify that address as
an e-mail destination.
Important
❒ To use this function, you must connect an LDAP server to the network.
❒ It is necessary to register the LDAP server under [System Settings]. Also, set [LDAP
Search] to [On] under [System Settings]. For details, see “General Settings Guide”.
A Press the {Search Destination} key.
The illustration is an example. The actual appearance may be different.
B Select [Search LDAP], and then press the {OK} key.
C Select [Select Server], and then press the {OK} key.
D Select the server, and then press the {OK} key.
If authentication is required to access the server, the authentication screen ap-
pears. Enter the user name and password correctly.
The Search LDAP screen reappears.
ZZZ610S

Ricoh Aficio MP 2000 Specifications

General

Print Technology	Laser
Type	Monochrome Multifunction Printer
Functions	Print, Copy, Scan, Fax
Print Speed	20 ppm
Print Resolution	600 x 600 dpi
Duplex Printing	Optional
Monthly Duty Cycle	15, 000 pages
Paper Output Capacity	250 sheets
Paper Sizes	A3, A4, A5, B4, B5
Copy Speed	20 cpm
Copy Resolution	600 x 600 dpi
Scan Resolution	600 dpi
Power Source	220 - 240 V, 50/60 Hz
Connectivity	USB, Ethernet
Memory	Standard 16 MB
Zoom Range	50% - 200%
Scan Speed	22 ipm
Fax Resolution	200 x 200 dpi
Operating System Compatibility	Windows, Mac
Paper Input	250 sheets