Ricoh Aficio MP 2000 User Manual

Basic Procedure for Sending by Scan to Folder
47
2
Basic Procedure for Sending by Scan to Folder
This section describes the basic operation for sending scan files by Scan to Folder.
A Make sure that no previous settings remain.
If a previous setting remains, press the {Clear Modes} key.
B If the Network Delivery Scanner or E-mail screen is displayed, press
[] key to switch to the Scan to Folder screen.
C Place originals.
D If necessary, select the original type.
For details, see "Selecting Original Type".
E If necessary, specify the scanning density.
For details, see "Adjusting Image Density".
F Select a destination.
You can specify multiple destinations.
For details, see "Specifying Scan to Folder Destinations".
G If necessary, press [Options] to specify the resolution and orientation of the
originals.
For details, see "Specifying Send Options".
H Press the {Start} key.
Scanning starts.
You must press the {q} key to send scan files that are scanned from the ex-
posure glass.
Scan files that are scanned from the ADF/ARDF are sent immediately.

Ricoh Aficio MP 2000 Specifications

General

Print Technology	Laser
Type	Monochrome Multifunction Printer
Functions	Print, Copy, Scan, Fax
Print Speed	20 ppm
Print Resolution	600 x 600 dpi
Duplex Printing	Optional
Monthly Duty Cycle	15, 000 pages
Paper Output Capacity	250 sheets
Paper Sizes	A3, A4, A5, B4, B5
Copy Speed	20 cpm
Copy Resolution	600 x 600 dpi
Scan Resolution	600 dpi
Power Source	220 - 240 V, 50/60 Hz
Connectivity	USB, Ethernet
Memory	Standard 16 MB
Zoom Range	50% - 200%
Scan Speed	22 ipm
Fax Resolution	200 x 200 dpi
Operating System Compatibility	Windows, Mac
Paper Input	250 sheets