Sending Scan Files by Scan to Folder
56
2
Sending Scan Files to a Shared Folder on the Network
This section explains how to specify the destination when sending files to a
shared network folder.
Important
❒ You must create a shared folder on the client computer in advance. You can
create the shared folder under Windows98/Me/2000/XP, WindowsNT4.0,
Windows Server 2003, and Mac OS X.
❒ Depending on the operating system of the client computer, access to the
shared folder may require authentication.
You can send a file to a shared folder over the network by any of the following
methods:
• Enter the destination path manually
• Specify the destination folder path by browsing
Entering the path to a destination folder
Use the following procedure to enter the destination path manually.
A Press [Dest.:].
B Select [SMB], and then press the {OK} key.
C Select [Manual Entry], and then press the {OK} key.
To Next Page
Loading...
