Ricoh Aficio MP 2000 User Manual

Specifying E-mail Destinations
25
1
K Press [Search].
Destinations that match the search conditions are displayed.
L Press the {U} or {T} key to select the destination, and then press the {V}
key.
The check box on the left side of the selected destination is selected.
M Press the {OK} key.
Note
❒ Up to 100 destinations can be displayed as search results.
❒ If an e-mail address returned by the LDAP server is too long, it will be im-
possible to specify it as the destination. For details about the number of
characters that can be specified, see "E-mail".
❒ You can register multiple e-mail addresses in individual LDAP server ac-
counts. However, only one e-mail address will be displayed as the search
result. Usually, the address that was registered first on the LDAP server is
the address that is displayed.
❒ You can select criteria from the following list:
• [Include]: The names which contain an entered character or characters are
targeted.
Example) To find "ABC", enter "A", "B" or "C".
• [Exclude]: The names which do not contain an entered character or charac-
ters are targeted.
Example) To find "ABC", enter "D".
• [First Word]: The names which start with the entered character or characters
are targeted.
Example) To find "ABC", enter "A".

Ricoh Aficio MP 2000 Specifications

General

Print Technology	Laser
Type	Monochrome Multifunction Printer
Functions	Print, Copy, Scan, Fax
Print Speed	20 ppm
Print Resolution	600 x 600 dpi
Duplex Printing	Optional
Monthly Duty Cycle	15, 000 pages
Paper Output Capacity	250 sheets
Paper Sizes	A3, A4, A5, B4, B5
Copy Speed	20 cpm
Copy Resolution	600 x 600 dpi
Scan Resolution	600 dpi
Power Source	220 - 240 V, 50/60 Hz
Connectivity	USB, Ethernet
Memory	Standard 16 MB
Zoom Range	50% - 200%
Scan Speed	22 ipm
Fax Resolution	200 x 200 dpi
Operating System Compatibility	Windows, Mac
Paper Input	250 sheets