Ricoh Aficio MP 301SPF - Placing Originals on the Exposure Glass (Mainly North America)

CMS001
1
1
1. Positioning mark
3. Lower the ADF.
Placing Originals on the Exposure Glass (mainly North America)
• Do not lift the ADF forcefully. Otherwise, the cover of the ADF might open or be damaged.
1. Lift the ADF.
2. Place the original face down on the exposure glass. The original should be aligned to the
rear left corner.
Start with the first page to be scanned.
CMS001
1
1
1. Positioning mark
3. Lower the ADF.
Placing Originals
53