EasyManuals Logo

Ricoh Aficio MP C2030 Security Reference

Ricoh Aficio MP C2030
252 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #172 background imageLoading...
Page #172 background image
Tunnel end point setting
msh> ipsec manual {1|2|3|4|default} tunneladdar beginning IP address ending IP
address
Enter the separate setting number [1-4] or [default] and specify the tunnel end point beginning
and ending IP address.
Not specifying either the beginning or ending address displays the current settings.
Authentication algorithm and authentication key settings
msh> ipsec manual {1|2|3|4|default} auth {hmac-md5|hmac-sha1} authentication key
Enter the separate setting number [1-4] or [default] and specify the authentication algorithm,
and then set the authentication key.
If you are setting a hexadecimal number, attach 0x at the beginning.
If you are setting an ASCII character string, enter it as is.
Not specifying either the authentication algorithm or key displays the current setting. (The
authentication key is not displayed.)
Encryption algorithm and encryption key setting
msh> ipsec manual {1|2|3|4|default} encrypt {null|des|3des|aes128|aes192|aes256}
encryption key
Enter the separate setting number [1-4] or [default], specify the encryption algorithm, and then
set the encryption key.
If you are setting a hexadecimal number, attach 0x at the beginning. If you have set the encryption
algorithm to [null], enter an encryption key of arbitrary numbers 2-64 digits long.
If you are setting an ASCII character string, enter it as is. If you have set the encryption algorithm
to [null], enter an encryption key of arbitrary numbers 1-32 digits long.
Not specifying an encryption algorithm or key displays the current setting. (The encryption key
is not displayed.)
Reset setting values
msh> ipsec manual {1|2|3|4|default|all} clear
Enter the separate setting number [1-4] or [default] and reset the specified setting. Specifying
[all] resets all of the settings, including default.
ipsec ike
To display or specify the encryption key auto exchange settings, use the "ipsec ike" command.
Display current settings
msh> ipsec ike {1|2|3|4|default}
To display the settings 1-4, specify the number [1-4].
6. Enhanced Network Security
170
6

Table of Contents

Other manuals for Ricoh Aficio MP C2030

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ricoh Aficio MP C2030 and is the answer not in the manual?

Ricoh Aficio MP C2030 Specifications

General IconGeneral
BrandRicoh
ModelAficio MP C2030
CategoryAll in One Printer
LanguageEnglish

Related product manuals