3. Enter a login user name, and then press the [OK] key.
When you assign the administrator for the first time, enter "supervisor".
4. Enter a login password, and then press the [OK] key.
When you assign the administrator for the first time, press the [OK] key without entering login
password.
Logging off as the Supervisor
If administrator authentication has been specified, be sure to log off after completing settings. This section
describes how to log off after completing settings.
1. Press [Logout].
2. Press [Yes].
Changing the Supervisor
This section describes how to change the supervisor's login name and password.
9. Appendix
194
To Next Page
Loading...
