Login (Using the Control Panel)
Use the following procedure to log in when Basic Authentication, Windows Authentication, LDAP
Authentication, or Integration Server Authentication is enabled.
1. Enter a login user name, and then press the [OK] key.
2. Enter a login password, and then press the [OK] key.
When the user is authenticated, the screen for the function you are using appears.
Log Off (Using the Control Panel)
Follow the procedure below to log off when Basic Authentication, Windows Authentication, or LDAP
Authentication is set.
1. Press the [User Tools/Counter] key.
2. Press [Logout].
3. Press [Yes].
3. Users/Authentication and Its Application
90
To Next Page
Loading...
