To Next Page

To Previous Page

• Off

Settings by SNMP v1 and v2

This can be specified by the network administrator. When the machine is accessed using the SNMPv1,

v2 protocol, authentication cannot be performed, allowing machine administrator settings such as

the paper setting to be changed. If you select [Prohibit], the setting can be viewed but not specified

with SNMPv1, v2.

• Prohibit

• Do not Prohibit

Restrict Use of Simple Encryption

This can be specified by the network administrator. When a sophisticated encryption method cannot

be enabled, simple encryption will be applied. For example, when using User Management Tool and

Address Management in Smart Device Monitor for Admin to edit the Address Book, or

DeskTopBinder and ScanRouter delivery software and SSL/TLS cannot be enabled, make this setting

[Off] to enable simple encryption. When SSL/TLS can be enabled, make this setting [On].

For details about specifying SSL/TLS, see "Setting the SSL / TSL Encryption Mode".

If you select [On], specify the encryption setting using the printer driver.

• On

• Off

Transfer to Fax Receiver

This can be specified by the machine administrator.

If you use [Forwarding] under the fax function, files stored in the machine can be transferred or

delivered.

To prevent stored files being transferred by mistake, select [Prohibit] for this setting.

• Prohibit

• Do not Prohibit

If you select [Prohibit] for this setting, the following functions are disabled:

• Forwarding

• Delivery from Personal Box

• Information Box

• Routing Received Documents

Authenticate Current Job

This can be specified by the machine administrator. This setting lets you specify whether or not

authentication is required for operations such as canceling jobs under the copier and printer functions.

If you select [Login Privilege], authorized users and the machine administrator can operate the

machine. When this is selected, authentication is not required for users who logged on to the machine

before [Login Privilege] was selected.

7. Specifying the Extended Security Functions

180

Ricoh Aficio MP C2030 Security Reference

Other manuals for Ricoh Aficio MP C2030