• If you have enabled Administrator Authentication Management, make sure not to forget the
administrator login user name and login password. If an administrator login user name or login
password is forgotten, a new password must be specified using the supervisor's authority. For
instructions on registering the supervisor, see "Supervisor Operations".
• Be sure not to forget the supervisor login user name and login password. If you do forget them, a
service representative will have to return the machine to its default state. This will result in all data in
the machine being lost and the service call may not be free of charge.
1. Press the [User Tools/Counter] key.
2. Press [System Settings] using [ ] or [ ], and then press the [OK] key.
3. Select [Administrator Tools] using [ ] or [ ], and then press the [OK] key.
4. Press [Admin. Auth. Management] using [ ] or [ ], and then press the [OK] key.
5. Select [User Management], [Machine Management], [Network Management], or [File
Management] using [ ] or [ ], and then press the [OK] key.
Enabling Administrator Authentication
25
To Next Page
Loading...
Need help?
General
