11. Select [Use Auth. Info at Login] using [ ] or [ ], and then press the [OK] key.
For folder authentication, select [Use Auth. Info at Login] in "Folder Authentication".
For LDAP authentication, select [Use Auth. Info at Login] in "LDAP Authentication".
12. Press the [Escape] key.
13. Press [End].
14. Press the [OK] key.
15. Press the [User Tools/Counter] key.
• When using [Use Auth. Info at Login] for "Folder Authentication" or "LDAP Authentication", a user
name other than "other" , "admin" , "supervisor" or "HIDE***" must be specified. The symbol "***"
represents any character.
• p.51 "Specifying Login User Name and Login Password"
Basic Authentication
57
To Next Page
Loading...
