Ricoh Aficio MP C3502

Other manuals for Ricoh Aficio MP C3502

Questions and Answers:

J
Janet DawsonAug 29, 2025
What to do if Ricoh Copier says 'Following output tray is full. Remove paper.'?
- B
  Bradley NunezAug 29, 2025
  If your Ricoh Copier displays the message 'Following output tray is full. Remove paper,' it means the output tray is full. Remove paper from the output tray to resume printing. If paper is going to the finisher shift tray, press the [Stop] key to suspend printing to prevent paper from falling, then remove the paper and press [Continue] on the display panel to resume printing.
G
Gregory HarmonAug 28, 2025
Why do documents not print from my Ricoh Copier?
- E
  Elizabeth WestAug 29, 2025
  Documents might not print from your Ricoh Copier if the paper output tray is full, in which case you should remove the prints from the tray. Another reason could be that there is no paper left, so you should load paper into the copier.
G
Gregory AguilarAug 27, 2025
What to do if error message remains on Ricoh All in One Printer?
- J
  Jasmine FranklinAug 27, 2025
  To clear an error message on your Ricoh All in One Printer after removing misfed paper, open and close the cover as required. Also, check if paper is still jammed in the tray.
T
Travis StanleyAug 26, 2025
How to enable duplex printing on Ricoh All in One Printer?
- W
  Wesley HowardAug 27, 2025
  If you cannot print in duplex mode with your Ricoh All in One Printer, it might be because you've selected a paper tray that isn't set for duplex printing. Change the setting for "Apply Duplex" in System Settings to enable duplex printing for the paper tray. Alternatively, you might have selected a paper type that cannot be used for duplex printing. In [Tray Paper Settings], select a paper type suitable for duplex printing.
B
Bridget RussellAug 25, 2025
Why does Ricoh All in One Printer print on the reverse side?
- T
  Tina WalkerAug 26, 2025
  If your Ricoh All in One Printer prints original images on the reverse side of the paper, you might have loaded the paper incorrectly. Load paper into the paper tray or tray 3 (LCT) with the print side up. Load paper into the Large capacity tray (LCT), or bypass tray with the print side down.
R
riddlejuanAug 25, 2025
Why does my Ricoh All in One Printer misfeed frequently?
- A
  April CarrollAug 25, 2025
  If misfeeds occur frequently with your Ricoh All in One Printer, ensure the tray's side or end fences are set properly and locked. Also, do not place anything on the finisher tray. If you load a paper size that is not selected automatically, specify the paper size using the control panel. If misfeeds occur frequently when printing on sheets loaded in internal tray 2, raise the guide on internal tray 2, and then try printing the job again. If sheets are curled when they are output, raise the guide on internal tray 2.

Ricoh Aficio MP C3502 Specifications

General

Print Technology	Laser
Print Speed	35 ppm
Max Print Resolution	1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Functions	Print, Copy, Scan, Fax
Duplex Printing	Yes
Memory (Standard)	1.5 GB
Hard Disk Drive	250 GB
Standard Paper Capacity	1, 200 sheets
Max Paper Capacity	4, 400 sheets
Connectivity	USB 2.0, Ethernet
Fax Transmission Speed	33.6 Kbps (optional)
Operating System Compatibility	Windows, Mac, Linux
Scan Resolution	600 dpi