• You can load up to 10 envelopes (80 - 95 g/m
2
, 24 lb.) in the bypass tray at the same time, without
compressing them. Check the envelopes are not damp. Load only as much envelopes as can be held
between the paper guides on the bypass tray.
• Check there is no air in the envelopes before loading.
• To get better print quality, it is recommended that you set the right, left, top, and bottom print margin,
to at least 15 mm (0.6 inch) each.
• You cannot print envelopes with the Duplex function.
• Load only one size and type of envelope at a time.
• Before loading envelopes, flatten leading edges (the side going into the machine) by pressing a pencil
or ruler across them.
• Before loading envelopes, check they are rectangular in shape.
• For details about supported envelope types, see “Envelopes”, About This Machine.
2. Basic Copying
52
To Next Page
Loading...
Need help?
General
