• Under Windows Authentication, you can select whether or not to use secure sockets layer (SSL)
authentication.
• To automatically register user information such as e-mail addresses under Windows authentication,
it is recommended that communication between the machine and domain controller be encrypted
using SSL.
• Under Windows Authentication, you do not have to create a server certificate unless you want to
automatically register user information such as e-mail addresses using SSL.
• p.177 "Limiting Available Functions"
Installing Internet Information Services (IIS) and Certificate services
Specify this setting if you want the machine to automatically obtain e-mail addresses registered in Active
Directory.
We recommended you install Internet Information Services (IIS) and Certificate services as the Windows
components.
Install the components, and then create the server certificate.
If they are not installed, install them as follows:
1. Select [Add/Remove Programs] on the Control Panel.
2. Select [Add/Remove Windows Components].
3. Select the “Internet Information Services (IIS)” check box.
4. Select the “Certificate Services” check box, and then click [Next].
5. Installation of the selected Windows components starts, and a warning message appears.
6. Click [Yes].
7. Click [Next].
8. Select the “Certificate Authority”, and then click [Next].
On the displayed screen, “Enterprise root CA” is selected.
9. Enter the Certificate Authority name (optional) in “CA Identifying Information”, and then
click [Next].
10. Leave “Data Storage Location” at its default, and then click [Next].
Internet Information Services and Certificate services are installed.
Windows Authentication
71
To Next Page
Loading...
