Creating the Server Certificate
After installing Internet Information Services (IIS) and Certificate services Windows components, create the
Server Certificate as follows:
1. Start Internet Services Manager.
2. Right-click [Default Web Site], and then click [Properties].
3. On the “Directory Security” tab, click [Server Certificate].
Web Server Certificate Wizard starts.
4. Click [Next].
5. Select [Create a new certificate], and then click [Next].
6. Select [Prepare the request now, but send it later], and then click [Next].
7. Enter the required information according to the instructions given by Web Server Certificate
Wizard.
8. Check the specified data, which appears as “Request File Summary”, and then click [Next].
The server certificate is created.
Installing the Device Certificate (Certificate Issued by a Certificate Authority)
Install the device certificate using Web Image Monitor.
This section explains the use of a certificate issued by a certificate authority as the device certificate.
Enter the device certificate contents issued by the certificate authority.
1. Open a Web browser.
2. Enter “http://(the machine's IP address or host name)/” in the address bar.
When entering an IPv4 address, do not begin segments with zeros. For example: If the address is
“192.168.001.010”, you must enter it as “192.168.1.10” to connect to the machine.
The top page of Web Image Monitor appears.
3. Click [Login].
The network administrator can log on.
Enter the login user name and password.
4. Click [Configuration], and then click [Device Certificate] under “Security”.
The Device Certificate page appears.
5. Check the radio button next to the number of the certificate you want to install.
6. Click [Install].
7. Enter the contents of the device certificate.
2. Authentication and its Application
72
To Next Page
Loading...
