10. Enter the domain name, and then press [OK].
You cannot specify a domain name under an authentication system that does not support domain
login.
11. Press [Obtain URL].
The machine obtains the URL of the server specified in “Server Name”.
If the setting to be specified does not appear, press [ Next] to scroll down to other settings.
If “Server Name” or the setting for enabling SSL is changed after obtaining the URL, the URL is “Not
Obtained”.
12. Press [Exit].
In the “Authentication Type”, if you have not registered a group, proceed to step 17.
If you have registered a group, proceed to step 13.
If you set “Authentication Type” to [Windows (Native)] or [Windows (NT Compatible)], you can use
the global group.
If you set “Authentication Type” to [Notes], you can use the Notes group. If you set “Authentication
Type” to [Basic (Integration Server)], you can use the groups created using the Authentication
Manager.
Integration Server Authentication
89
To Next Page
Loading...
