13. Under “Group”, press [Program / Change], and then press [* Not Programmed].
If the setting to be specified does not appear, press [ Next] to scroll down to other settings.
14. Under “Group Name”, press [Change], and then enter the group name.
15. Press [OK].
16. Select which of the machine's functions you want to permit.
Authentication will be applied to the selected functions.
Users can use the selected functions only.
For details about specifying available functions for individuals or groups, see “Limiting Available
Functions”.
17. Press [OK].
2. Authentication and its Application
90
To Next Page
Loading...
