Basic Operation
• The original in the ADF takes precedence over the original on the exposure glass if you place
originals both in the ADF and on the exposure glass.
• To print on paper fed from Tray 1, remove the paper loaded in the bypass tray. Otherwise, the
paper in the bypass tray is fed first.
• [Sort] and [2 Sided Copy] cannot be used with the bypass tray.
• When making multiple copies of a multi-page document, you can select whether copies are output
in collated sets, or in page batches in the [Sort] setting under [Copier Features].
1. Press the [Copy] key.
2. Place the original on the exposure glass or in the ADF.
3. To make multiple copies, enter the number of copies using the number keys.
4. Press the [Start] key.
• If a paper jam occurs, printing stops halfway. Open the front cover, remove the print cartridge, and
then remove the jammed paper. If the paper cannot be removed in this way, remove it by opening
the fusing cover. Printing will resume automatically once the cover is closed.
4. Copying Originals
50
To Next Page
Loading...
