Specifying the Scan Settings
Specifying the Scanning Size According to the Size of the Original
1. Press the [Scanner] key.
If you are using Scan to USB, proceed to Step 4.
2. Using the number keys, enter the number of a registered scan destination.
For details, see page 66 "Registering the Scan Destination".
3. Press the [OK] key.
4. Press the [ ] or [ ] key to select [Original Size], and then press the [OK] key.
5. Press the [ ] or [ ] key to select the original size, and then press the [OK] key.
6. Press the [ ] key to return to the initial screen.
Adjusting Image Density
There are five image density levels. The higher the density level, the darker the scanned image.
1. Press the [Scanner] key.
To Next Page
Loading...
